Hydraulic Stainless Steel Metal Pipe Cutting Machine With 1 - 38 mm
160-31 Hydraulic Metal Circular Sawing Machine, Automatic Stainless
SteelMetal Circular Sawing Machine
Condition: New Place of origin: Jiangsu China
Model Number: 160-31 Machine Type: Pipe and Tube Cutting Machine
Raw Material: Pipe Power: Hydraulic
Certification: CE&ISO Cooling System: water cooling
160-31 automatic pipe cutting machine for Stainless steel pipe
Automatic clip feed, cutter feed, fixed-inch set, given the number
of stop and work measurement functions.Automatic mode:All manual recovery (Right) to select subtotals Shall be cut
several times and sent several materials, After the starter motor
(motor ON) Press (initiating) motor does not start or saw table is
not working,means each switch is not reset,Not automatically.
The machine is mainly worked by circuit Mitsubishi PLC computer
controller which is easy operation focused, sensitive and simple
maintenance. Automatic feeding, clamp the material, cut feeding
system, feeding precise, fast and can cut 4-10 times per minute,
cutting, without hurting the surface.
Counter can be set to cut the number of materials, automaticly
shutdown after the cut material is completed.Counter can count the
total day's work record. The total pressure, before and after
pressure can be adjusted without stop to ensure that the work does
not crush deformation. Cutting length accuracy at plus or minus
0.03m, smooth surface without burr,disposable clip cut 1-10 pipes
Front clip after clip, blade speed, feed speed can be adjusted by
paragraph, Work and workpiece accuracy is under control.
Cut pipe diameter
Cut pipe wall thickness
Main motor power
150-430 Rev / min
Coolant pump motor
Head / flow
2mm－３５０mm That can be sent twice which means ７００mm
(Length × width × height)１５６０mm×820mm×1470mm
Random factory documents and information:
1 1 Product certification
2 1 Instructions
3 a set of distribution ring
4 an allen wrench set.
5 Mould drawings (provided by contract).
Installation, commissioning, training, after-sales service
1,Installation and acceptance
1.1 After the machinery from the supply side to the demand side,
the demand side is responsible for unloading facility.
1.2 Supplier is responsible for the mechanical commissioning.
1.3Demand side should accept the machine after bending specimens
according to demand’s request (subject to the requirements of the
Train to all the adjustment workers, operators, maintenance workers
(hydraulic, pneumatic lubrication system maintenance personnel,
electrical, electronic and control systems personnel, CNC
programmers, technical staff),to make sure they can operate,
adjust, repair, programming properly.
3.1 Quality "three guarantees" period: 12 months form the
commissioning date of acceptance by the demand side
3.2 During the "three guarantees" period of equipment failure, the
supplier is responsible for free repair, replacement parts (except
for the demand side in violation of the rules of accidental damage
3.3 Responding to the supplier to provide services required by the
buyer receives telephone (fax) the day after, within 48 hours
(except holidays) sent to the demand-side scene.